Änderungen

Aus Hackerspace Ffm
Wechseln zu: Navigation, Suche

MembraneBreathCtrl

45 Byte hinzugefügt, 23:44, 7. Jan. 2022
=== Calibration ===
The software uses an automatic calibration of the base-line every time no pressure is detected. So even after replacing the membrane you usually don't have to re-calibrate the device manually. On the first setup you have to define by a single number the sensitivity of your setup (mainly dependent on you hall sensor, magnets and distance magnet vs hall-sensor) so that the maximum blow (where usually the membrane magnet hits the top acrylic plate) outputs a CC value of up to 127.
 
[[Datei:MembraneBreathCtrlParts.jpg|400px]]
=== Instruments ===
1.993
Bearbeitungen