Änderungen
Aus Hackerspace Ffm
*[http://youtu.be/wAL9d7FgInk Still Extruding: Calibrating XY&Z Step/MM]
*Settings Slic3r, 0.35mm nozzle
** PLA Temperature 195°C
** Extrusion multiplier 1.0Heatbed 60°C
** Layer height 0.29
** Perimerter Extrusion multiplier 1.0** Perimeter feed rate 30mm/s***Small perimeter feedrate feed rate 25mm/s** Travel feed rate 150150mm/mmss
** Infill feed rate 60mm/s
** Solid infill feedrate feed rate 60mm/s
** Bridge feed rate 75mm/s
** Bridge flow ratio 1.25mm/s
