Änderungen
Aus Hackerspace Ffm
/* Calibration */
*[http://youtu.be/wAL9d7FgInk Still Extruding: Calibrating XY&Z Step/MM]
*Settings Slic3r, 0.35mm nozzle
** PLA Temperature 195°C200°C** Heatbed 60°C40°C (first layer)*** 65°C following layer
** Layer height 0.29
** Extrusion multiplier 1.0
** Perimeter feed rate 30mm/s
*** Small perimeter feed rate 25mm/s
** Travel feed rate 150mm130mm/s
** Infill feed rate 60mm/s
** Solid infill feed rate 60mm50mm/s
** Bridge feed rate 110mm/s
** Bridge flow ratio 1.25
