*[https://github.com/ahmetcemturan/SFACT/wiki/Calibration https://github.com/ahmetcemturan/SFACT/wiki/Calibration]
*[http://youtu.be/wAL9d7FgInk Still Extruding: Calibrating XY&Z Step/MM]
*Settings Slic3r
** Heatbed 60°C
** PLA Temperature 195°C
** Extrusion multiplier 1.0
** Layer height 0.29 (0.30)
** Travel feed rate 120
==Pictures==
<gallery caption"My RepRap">