Änderungen
Aus Hackerspace Ffm
/* It does not compile */
|Highly speed-optimized code (using Assembler for audio core)||X||-
|-
|Size Using size-optimized using minimal SD-FAT library||X||-
|-
|Universal SD library in the background supporting framentated fragmented files and many other uses||-||X
|-
|Stereo operation possible||X||X
|Quad speaker operation possible||X||X
|-
|Volume seting setting support||-||X
|}
So depending on your needs, try the library that best fit your needs. TMRpcm might be easier for beginners. Both libraries should work with the same connections. You can take the information about the connections from here and use the TMRpcm library with that.
You want even more, multi-channel audio playback, digital filters, mixers, DSP functions? Then take a look at the [http://www.pjrc.com/teensy/td_libs_Audio.html Teensy 3.1 Audio Library] using a serious (but still affordable) micro controller but still using the Arduino IDE.
= Download =
Datei:SSDA Better16bit.png|Still unexpensive solution to get nice 16-bit audio output
</gallery>
The 16-bit output is done by operating two 8-bit outputs together: One will provide an 8-bit signal containing the higher 8-bits and the other one contains the lower 8-bits. If you listen to each of those channels separately, you will hear the usual audio on the upper 8-bit outputs but with noticable 8-bit noise especially on quiet audio parts. On the lower 8-bit you will hear just noise. But when you add this noise (reduced in volume by a factor of 256th done by the resistors) to the higher 8-bits then something magic will happen: The 8-bit noise will vanish (but unfortunately often a lot of noise originating from power supply might still be left).
=== Audio amplifier for loudspeakers ===
== It does not compile ==
* Are you using the latest version of Arduino IDE?
** SimpleSDAudio_V1.00 need at least V1.0.1 of Arduino IDE. It has been tested and works ok also under V1.6.1.
** SimpleSDAudio_V1.01 need at least V1.0 of Arduino IDE (remove complete block with !Serial from examples when using with Arduino IDE V1.0).
