Raspberry PI Zero + nano USB WiFi Adapter mod: Unterschied zwischen den Versionen

Aus Hackerspace Ffm
Wechseln zu: Navigation, Suche
 
Zeile 1: Zeile 1:
I have received my brand new Raspberry PI Zero. I like really the small size of the PI Zero,
+
I have received my brand new Raspberry PI Zero. I really like the small size of the PI Zero,
but one feature is missing for a lot of projects. Network capabilities!!
+
but one feature is missing for a lot of projects: Network capabilities!!
So, I have removed carefully the case from the Edimax WiFi USB Adapter, taped with Capton tape
+
So, I have carefully removed the case from the Edimax WiFi USB Adapter, taped it with Capton tape
and bodge wired to the PI's USB port. It was quite easy because there are test points for
+
and bodge wired it to the PI's USB port. It was quite easy because there are test points for
USB power and USB data pin's. Because the USB data lines are differential lines, you have to
+
USB power and USB data pins. Because the USB data lines are differential lines, you have to
keep the two wire's same in length. I have used a another RasPI to setup the WiFi credentials.
+
keep the two wires equal in length. I have used a another RasPI to setup the WiFi credentials.
  
  

Aktuelle Version vom 29. November 2015, 04:18 Uhr

I have received my brand new Raspberry PI Zero. I really like the small size of the PI Zero, but one feature is missing for a lot of projects: Network capabilities!! So, I have carefully removed the case from the Edimax WiFi USB Adapter, taped it with Capton tape and bodge wired it to the PI's USB port. It was quite easy because there are test points for USB power and USB data pins. Because the USB data lines are differential lines, you have to keep the two wires equal in length. I have used a another RasPI to setup the WiFi credentials.